Incremental rotary encoder RVS58S-YYYKYA6ZT-01024
来源：未知 日期：2016/12/30 浏览量：次
参数表节选：的技术参数 RVS58S-YYYKYA6ZT-01024
| General specifications | ||
|---|---|---|
| Pulse count | 1024 and 2048 | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Performance level (PL) | PL e | |
| MTTFd | 1000 a | |
| Mission Time (TM) | 20 a | |
| PFHd | 2.41 E-9 | |
| L10h | 7.5 E+9 at 6000 rpm | |
| Diagnostic Coverage (DC) | 98 % | |
| Electrical specifications | ||
| Operating voltage | 5 V DC ± 5 % | |
| No-load supply current | max. 70 mA | |
| Output | ||
| Output type | sine / cosine | |
| Amplitude | 1 Vss ± 10 % | |
| Load current | max. per channel 10 mA , short-circuit protected, reverse polarity protected | |
| Output frequency | max. 200 kHz (3 dB limit) | |
| Connection | ||
| Cable | Single stranded wires with crimp contact, 10 x AWG26, 230 mm | |
| Standard conformity | ||
| Degree of protection | DIN EN 60529, IP40 | |
| Climatic testing | DIN EN 60068-2-78 , no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007/A1:2011 | |
| Noise immunity | DIN EN 61000-6-2 , advanced testing level to IEC 61326-3-1 | |
| Shock resistance | DIN EN 60068-2-27, 100 g, 3 ms | |
| Vibration resistance | DIN EN 60068-2-6, 20 g, 55 ... 2000 Hz | |
| Functional safety |
IEC 61508:2000 IEC 62061:2005 ISO 13849-1:2006 IEC 61800-5-2:2007 EN 50178:1997 IEC 61326-3-1:2007 Suitable up to SIL 3, PL e depending from configuration, see manual and report |
|
| Approvals and certificates | ||
| UL approval | cULus Recognized, General Purpose, Class 2 Power Source | |
| TÜV approval | Cert. No. Z10 08 10 68273 001 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 115 °C (-4 ... 239 °F) , fixed cable | |
| Storage temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Material | ||
| Housing | aluminum, blank | |
| Flange | 3.1645 aluminum | |
| Shaft | Stainless steel 1.4305 / AISI 303 | |
| Mass | approx. 350 g | |
| Rotational speed | max. 8000 min -1 | |
| Moment of inertia | ≤ 25 gcm2 | |
| Starting torque | ≤ 1.5 Ncm | |
| Shaft load | ||
| Axial |
at 40 N max. 6000 rpm at 10 N max. 8000 rpm |
|
| Radial |
at 60 N max. 6000 rpm at 20 N max. 8000 rpm |
|