拉线式旋转编码器 ECA10TL - PROFINET
来源：未知 日期：2017/03/13 浏览量：次
旋转编码器可以用来测量旋转速度，加速度，位置和方向。编码器可以应用在大量的机械工程行业，例如物料输送、物流和包装行业。您肯定能够从我们广阔的产品线中找到适合您的应用环境的产品。
在工业自动化领域中，旋转编码器可以被用作测量角度、位置、速度和角速度，通过使用齿条、测量轮以及恒力开度仪我们可以测量直线的运动位置。
旋转编码器可以将机械的输入转换为电气信号，这个电气信号可以通过计数器、转速表、可编程逻辑控制器（例如PLC）和工业计算机进行处理。
拉线编码器是由机械拉线盒和旋转编码器两部分组成，是用来精确测量直线位移的传感器。工作时，直线的位移通过拉线盒的转动鼓转换为旋转运动，然后通过旋转编码器将直线位移检测出来。
产品特点：● Solid yet lightweight plastic construction
● Compact, slim design (the shaft of the mounted rotary encoder is used to provide the function of the drum bearing)
● Coupling-free adaptation
● Wide range of mounting options
● Rust and acid-resistant measuring cable
● Very high level of linearity and repeatability
● PROFINET interface
● Free of wear magnetic sampling
| 产品阐述： | ||
|---|---|---|
| Cable pull rotary encoder with PROFINET interface | ||
| 一般规格： | ||
|---|---|---|
| Detection type | magnetic sampling | |
| Device type | Target line with PROFINET interface | |
| Measuring range | 3000 ... 10000 mm | |
| Construction type | 80 mm, 130 mm, 190 mm | |
| Resolution |
Cable pull: 80 mm design: 0,028 mm 130 mm design: 0,047 mm 190 mm design: 0,068 mm Encoder: 25 Bit (13 Bit/revolution) |
|
| 功能安全相关参数： | ||
| B10d | 300000 | |
| 电气规格： | ||
| Operating voltage | 10 ... 30 V DC | |
| Power consumption | approx. 4 W | |
| Output code | binary code | |
| Code course (counting direction) | adjustable | |
| 接口： | ||
| Transfer rate | 10 MBit/s / 100 MBit/s | |
| 连接： | ||
| Connector |
Ethernet: 2 sockets M12 x 1, 4-pin, D-coded Supply: 1 plug M12 x 1, 4-pin, A-coded |
|
| 标准的一致性： | ||
| Degree of protection | DIN EN 60529 | |
| Connection side |
connector models: IP65 Cable pull: IP50 |
|
| Climatic testing | DIN EN 60068-2-3, no moisture condensation | |
| Emitted interference | EN 61000-6-4:2007 | |
| Noise immunity | EN 61000-6-2:2005 | |
| 环境条件： | ||
| Ambient temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Operating temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Storage temperature | -30 ... 70 °C (-22 ... 158 °F) | |
| Relative humidity | 98 % , no moisture condensation | |
| 机械规格： | ||
| Rope diameter | 0.55 mm | |
| Bending radius | min. 14 mm | |
| Breaking force | min. 330 N | |
| Material | ||
| Housing | nickel-plated steel , painted | |
| Cable pull | plastic , Lexan 920 | |
| Flange | aluminum | |
| Rope | Stainless steel 1.4401/316 | |
| Life span | up to 106 Cycles | |