来源:未知 日期:2017/01/20 浏览量:次
产品阐述 | ||
---|---|---|
AS-Interface power supply, data decoupling, 2,8 A |
General specifications | ||
---|---|---|
UL File Number | E223176 | |
Indicators/operating means | ||
LED AS-i ok |
LED green: ON: AS-Interface voltage OK OFF: overload or no supply voltage |
|
Electrical specifications | ||
Fusing | 2.5 AT (not replacable) | |
Capacity factor | > 0.5 | |
Rated operating voltage |
nominal: 100 ... 120 VAC/220 ... 240 VAC permissible: 85 ... 132 VAC/184 ... 264 VAC |
|
Rated operating current |
2.0 A at 115 VAC 0.9 A at 230 VAC |
|
Supply frequency | 47 ... 63 Hz | |
Efficiency | 90.5 % (230 VAC, 2.8 A) | |
Output | ||
Current limit | > 3.2 A | |
Current | 2.8 A | |
Voltage | 30.55 VDC ± 3 % fixed | |
Residual ripple | ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) | |
Short-circuit current | min. 3.2 A, max. 4.6 A | |
Compliance with standards and directives | ||
Directive conformity | ||
Low Voltage Directive 2006/95/EC | EN 60950-1:2006, EN 61204-3:2001 | |
EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-3:2007, EN 50295:1999 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-6-2:2005; EN 61000-6-3:2007 | |
AS-Interface | EN 50295:1999, IEC 62026-2:2006 | |
Mech. capacity | EN 60068-2-6:2008 | |
Shock and impact resistance | EN 60068-2-27:1995 | |
Ambient conditions | ||
Ambient temperature | -10 ... 70 °C (14 ... 158 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Pollution degree | 2 (EN 60950) | |
Mechanical specifications | ||
Degree of protection | IP20 | |
Protection class | I, Protective conductor connection necessary | |
Connection | Connection terminals, max. conductor cross-section 0.5 ... 6 mm2 (20-10 AWG), Stripping length 7 mm | |
Mass | approx. 500 g | |
Mounting | DIN mounting rail |