AS-Interface actuator module VBA-2A-G10-E2L-1M-2V1-W
来源：未知 日期：2017/01/20 浏览量：次
参数表节选：的技术参数 VBA-2A-G10-E2L-1M-2V1-W
| 产品阐述 | ||
|---|---|---|
|
G10 ultra compact module 2 outputs |
||
| General specifications | ||
|---|---|---|
| Slave type | A/B slave | |
| AS-Interface specification | V3.0 | |
| Required master specification | ≥ V2.1 | |
| UL File Number | E223772 "For use in NFPA 79 Applications only" | |
| Functional safety related parameters | ||
| MTTFd | 516 a | |
| Indicators/operating means | ||
| LED FAULT |
error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
|
| LED AS-i | AS-Interface voltage; LED green | |
| LED OUT | Switching state (output); 2 LED yellow | |
| Electrical specifications | ||
| Auxiliary voltage | 20 ... 30 V DC PELV | |
| Rated operating voltage | 18.5 ... 31.6 V from AS-Interface | |
| Rated operating current | ≤ 40 mA / max. 60 mA | |
| Protection class | III | |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) | |
| Output | ||
| Number/Type | 2 electronic outputs, PNP, overload and short-circuit proof | |
| Supply | from external auxiliary voltage UAUX | |
| Current | 2 A per output, TB ≤ 40°C: 4 A total, 40°C < TB ≤ 70°C: 3 A total , overload and short-circuit protected | |
| Voltage | ≥ (UAUX - 0.5 V) | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 50295:1999 | |
| Standard conformity | ||
| Noise immunity | EN 61000-6-2:2005, EN 50295:1999 | |
| Emitted interference | EN 61000-6-4:2007 | |
| Degree of protection | EN 60529:2000 | |
| Fieldbus standard | EN 50295:1999, IEC 62026-2:2008 | |
| Electrical safety | IEC 61140:2004 | |
| Programming instructions | ||
| Profile | S-8.A.E | |
| IO code | 8 | |
| ID code | A | |
| ID1 code | 7 | |
| ID2 code | E | |
| Data bits (function via AS-Interface) | input output | |
| D0 | - OUT1 | |
| D1 | - OUT2 | |
| D2 | - - | |
| D3 | - - | |
| Parameter bits (programmable via AS-i) | function | |
| P0 |
communication monitoring P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition |
|
| P1 | not used | |
| P2 |
Lead breakage outputs P2 = 0 lead breakage on P2 = 1 lead breakage off (default settings) |
|
| P3 | not used | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Type 1 enclosure | |
| Maximum permissible ambient temperature | max. 65 °C (max. 149 °F) | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Mechanical specifications | ||
| Degree of protection |
IP67 IP67 / IP68 / IP69K with flat cable VAZ-FK-S-* |
|
| Connection |
AS-Interface/UAUX: AS-Interface flat cable Outputs & matching connector: M12 round connector, 4-pin, A-coded, according to IEC 61076-2-101:2012 |
|
| Material | ||
| Contacts | CuSn / Au | |
| Housing | PBT PC | |
| Body | black PUR | |
| Cable | PUR | |
| Mounting screw | Stainless steel 1.4305 / AISI 303 | |
| Cable | ||
| Sheath diameter | ∅4,3 mm | |
| Color | black | |
| Cores | 3 x 0.34 mm2 | |
| Length | 1 m | |
| Mass | 100 g | |
| Tightening torque, fastening screws | 1.65 Nm | |
| Tightening torque, cable gland | 0.4 Nm | |