来源:未知 日期:2017/07/12 浏览量:次
产品阐述: | ||
---|---|---|
HF read/write head, ISO 15693, for IDENTControl |
一般特性: | ||
---|---|---|
Operating frequency | 13.56 MHz | |
Transfer rate | 26 kBit/s | |
Sensing range | ||
Read distance | 0 ... 55 mm | |
Write distance | 0 ... 55 mm | |
Width | max. 45 mm | |
UL File Number | E87056 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source | |
指示灯/操作键: | ||
LED green/yellow |
Multihole-LED: green: power on green flashing: read/write attempt performed yellow: data carrier detected |
|
电气特性: | ||
Power consumption | ≤ 1.2 W | |
Supply | from the IDENTControl | |
与标准和规范体系的一致性: | ||
Directive conformity | ||
R&TTE Directive 1995/5/EC | EN 301489-1 V1.8.1 (2008-04), EN 301489-3 V1.4.1 (2002-08), EN 300330-2 V1.3.1 (2006-04), EN 60950-1:2006 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-6-2:2006 , EN 61000-6-4:2007 | |
Degree of protection | EN 60529:2000 | |
RFID | ISO/IEC 15693-2:2006 , ISO/IEC 15693-3:2009 , ISO/IEC 18000-3:2008 | |
许可和认证: | ||
FCC approval |
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. |
|
KCC approval | KCC-CRI-PF1-IQH1-18GM-V1 | |
周围环境: | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
机械特性: | ||
Degree of protection | IP67 | |
Connection | M12 x 1 connector | |
Material | ||
Housing | PBT/stainless steel | |
Encapsulation compound | CY 221/HY 2966 | |
Installation | non-flush | |
Distance between two heads |
Multiplex on: ≥ 30 mm Multiplex off: ≥ 80 mm |
|
Mass | approx. 40 g |