电感式传感器 NBB15-30GM50-E3-V1-3G-3D
来源：未知 日期：2018/02/26 浏览量：次
电感式接近传感器是大部分应用的首选产品，其范围涉及机械仪器和自动化设备领域的需要高精度、非接触式地检测金属目标物。作为一个该类产品的市场领导者，倍加福为客户提供创新的高质量的电感式接近传感器以满足世界范围内的自动化和过程控制市场的需求。我们在该领域有多年丰富经验，工作灵活，处处以客户为尊，根据不同客户的需求提供独特的解决方案。
标准电感式传感器产品特性：光滑或螺纹式不锈钢圆柱形外壳；反极性保护和短路保护；LED状态指示M8, M12接插件连接或端子接线方式；PVC，PUR或硅电缆出线方式；2线，3线，4线直流，交流，NAMUR输出方式以及AS-I总线方式输出。
电感式传感器是利用电磁感应把被测的物理量如位移，压力，流量，振动等转换成线圈的自感系数和互感系数的变化，再由电路转换为电压或电流的变化量输出，实现非电量到电量的转换。
在有些应用场合，对传感器的坚固耐用程度有着很高的要求，那么此类螺纹式坚固型不锈钢感应面传感器正是满足这种应用的最佳选择。类似于机械工具制造或金属加工等应用场合，常常会使传感器受到碰撞、磨损和被腐蚀性溶剂或其他流体侵蚀，那么在此环境下，不锈钢感应面传感器就能发挥出它的巨大优势：大大减少停工时间，延长使用寿命，有效提高生产效率。我们的金属感应面产品系列（NMB…）有两种：FE用于检测铁质金属，NFE用于检测非铁金属。
电感式传感器具有结构简单、动态响应快、易实现非接触测量等突出的优点，特别适合用于酸类，碱类，氯化物，有机溶剂，液态CO2，氨水，PVC粉料，灰料，油水界面等液位测量，目前在冶金、石油、化工、煤炭、水泥、粮食等行业中应用广泛。
产品特点：● 基本系列
● 10 mm齐平安装
● 增加工作距离
● ATEX认证zone 2和zone 22
| 一般特性： | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | PNP | |
| Rated operating distance | 15 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 12.15 mm | |
| Reduction factor rAl | 0.3 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.75 | |
| 额定值： | ||
| Operating voltage | 10 ... 30 V DC | |
| Switching frequency | 0 ... 200 Hz | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 °C | |
| No-load supply current | ≤ 15 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| 许可和认证： | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| 周围环境： | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| 机械特性： | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Housing diameter | 30 mm | |
| Degree of protection | IP67 | |
| 设备防护等级GC（NA）： | ||
| Certificate of Compliance | PF 15CERT3754 X | |
| Special conditions | ||
| Protection against transients | Ensure transient protection is provided and that the maximum value of the transient protection (140% of 85 V) is not exceeded. | |
| 设备保护水平直流（TC）： | ||
| Instruction | Manual electrical apparatus for hazardous areas | |
| Device category 3D | for use in hazardous areas with combustible dust | |
| Certificate of Compliance | PF 15CERT3774 X | |
| CE marking | [*PD-Z02586A*] | |
| ATEX marking |
 II 3D Ex tc IIIC T80°C DcThe Ex-related marking can also be printed on the enclosed label. |
|
| Standards |
EN 60079-0:2012+A11:2013, EN 60079-31:2014 Protection by enclosure "tc" Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
|
| General | The corresponding datasheets, declarations of conformity, EC-type examination certificates, certifications, and control drawings, where applicable (see datasheets), form an integral part of this document. These documents can be found at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the information provided in the datasheet. | |
| Installation, commissioning | Laws and/or regulations and standards governing the use or intended usage goal must be observed. If the Ex-relevant identification is printed exclusively on the adhesive label provided, this label must be affixed in the immediate vicinity of the sensor! The background surface to which the adhesivelabel is to be applied must be clean and free from grease! The applied label must be durable and remain legible, with due consideration of the possibility of chemical corrosion! | |
| Maintenance |
No changes can be made to apparatus, which are operated in hazardous areas. Repairs to these apparatus are not possible. |
|
| Special conditions | ||
| Maximum operating current IL |
The maximum permissible load current must be restricted to the values given in the following list. High load currents and load short-circuits are not permitted. |
|
| Maximum operating voltage UBmax | The maximum permissible operating voltage UBmax must be restricted to the values given in the following list. Tolerances are not permitted. | |
| Maximum permissible ambient temperature TUmax |
dependant of the load current IL and the max. operating voltage UBmax Information can be taken from the following list. |
|
| at UBmax=30 V, IL=200 mA | 54 °C (129.2 °F) | |
| at UBmax=30 V, IL=100 mA | 57 °C (134.6 °F) | |
| at UBmax=30 V, IL=50 mA | 58 °C (136.4 °F) | |
| Protection from mechanical danger | The sensor must not be exposed to ANY FORM of mechanical danger. | |
| Protection from UV light | The sensor and the connection cable must be protected from damaging UV-radiation. This can be achieved when the sensor is used in internal areas. | |
| Electrostatic charge | Electrostatic charges must be avoided on the mechanical housing components. Dangerous electrostatic charges on the mechanical housing components can be avoided by incorporating these in the equipotential bonding. Avoid electrostatic charges that can cause electrostatic discharge when installing or operating the device. Information on electrostatic hazards can be found in the technical specification IEC/TS 60079-32-1. Do not attach the nameplate provided in areas where electrostatic charge can build up. | |
| Plug connector | The plug connector must not be withdrawn under voltage. The proximity switch is identified as follows: "WARNING - DO NOT SEPARATE WHEN ENERGIZED". With the plug connector disconnected, soiling of the internal area must be prevented.(i.e. the area that is inaccessible when the connector is inserted) | |
| 一般信息： | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 3G; 3D | |
尺寸图
电气接线图
电感式接近传感器的电气指标：
1、工作电压：是指电感式接近传感器的供电电压范围，在此范围内可以保证传感器的电气性能及安全工作。
2、工作电流：是指电感式接近传感器连续工作时的最大负载电流。
3、电压降：是指在额定电流下开关导通时，在开关两端或输出端所测量到的电压，
4、空载电流：是指在没有负载时，测量所得的传感器自身所消耗的电流。
5、剩余电流：是指开关断开时，流过负载的电流。
6、极性保护：防止电源极性误接的保护功能。
7、短路保护：超过极限电流时，输出会周期性地封闭或释放，直至短路被清除。
如果您对以上产品有兴趣或有疑问，请联系我们的在线客服或拨打021-39520660，上海锝秉工控专业的采购顾问将为您提供最优的采购咨询服务。
物流运输更安全！ 在上海锝秉工控货品运输的费用从未被加进您所购买产品的售价中。只要您需要，我们就会免费为您提供服务。在运输方式上，上海锝秉工控一般采用快递方式发货，因为快递一般注重产品安全，打包时里面会装有海棉等填充物，这样可以避免运输途中的损坏，同时快递运输时间短，从而也减少客户的等待。
我们一起省钱！ 当您需要订购上海锝秉工控产品时，如我们库存有现货，您需支付全部货款，我们给您发货，如果是期货的，您需先支付30%定金，货到我们公司后您再支付100%的货款，您的及时付款是对我们工作的支持，同时也为我们节省了财务成本，这也是我们能一贯保持优质低价的原因之一。欢迎您的参与，让我们一起省钱吧！
用心服务客户至上！ 在上海锝秉工控购买的产品，可以享有上海锝秉工控强大的技术团队为您提供一对一的技术支持服务!在产品使用过程中，您遇到任何产品安装或是调试的问题，都可以随时联系我们，我们必定尽心尽力为您服务。用心服务，客户至上是我们服务的宗旨！