来源:未知 日期:2017/11/24 浏览量:次
产品阐述: | ||
---|---|---|
Retroreflective area sensor with 6 beams in a widely used standard photoelectric housing, red light, 4 m detection range, light/dark on, push-pull output, fixed cable with M12 plug |
一般特性: | ||
---|---|---|
Effective detection range | 0 ... 4 m | |
Threshold detection range | 5.6 m | |
Sensing range | typical 60 mm , Object has to cover the refelector completely in one dimension | |
Light source | LED | |
Light type | modulated visible red light , 625 nm | |
Polarization filter | yes | |
Number of beams | 6 | |
Diameter of the light spot | approx. 220 mm at detection range 4 m | |
Angle of divergence | +/- 2.5 ° | |
Resolution |
12 mm to 4 m Detection/capture range: 60 mm (no dead band) 5 mm to 1 m Detection/capture range: 55 mm (dead band: 150 mm in front of the sensor; 50 mm in front of the reflector) 5 mm to 1.5 m Detection/capture range: 40 mm (dead band: 150 mm in front of the sensor; 50 mm in front of the reflector) |
|
功能安全性参数: | ||
MTTFd | 310 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
指示灯/操作键: | ||
Function indicator |
2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted Teach-In : LED yellow/green; equiphase flashing; 2,5 Hz Changeover signal tracking: LED yellow, 1 Hz flashing / 2x flashing |
|
Control elements | Teach-In key | |
电气特性: | ||
Operating voltage | 12 ... 30 V DC | |
输出: | ||
Switching type | light/dark on | |
Signal output | 2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected | |
与标准和规范体系的一致性: | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2:2007/A1:2012 | |
机械特性: | ||
Degree of protection | IP67 | |
Connection | 300 mm fixed cable with M12 x 1, 4-pin connector | |
Material | ||
Housing | Plastic ABS | |
Optical face | Plastic pane |