光栅 LGS25 Serie
来源：未知 日期：2017/03/02 浏览量：次
● Automation light grid
● Optical resolution 25 mm
● Super-fast object detection, even with 3-way beam crossover
● Software-free adjustment of height monitoring
● Object identification using integrated object recognition
● IO-link interface for service and process data
● Optional temperature range to -30 °C
| 产品阐述： | ||
|---|---|---|
| Automation light grid with a beam gap of 25 mm, IO-Link interface, push-pull output, fixed cable with M12 plug | ||
| General specifications： | ||
|---|---|---|
| Effective detection range |
Standard : 0.3 ... 6 m Option /35: 0.5 ... 8 m |
|
| Threshold detection range |
Standard : 7.5 m Option /35: 10 m |
|
| Light source | IRED | |
| Light type | modulated infrared light , 850 nm | |
| Field height | see Table 1, max. 3200 mm | |
| Beam spacing | 25 mm | |
| Number of beams | see Table 1, max. 129 | |
| Angle of divergence | 10 ° | |
| Functional safety related parameters： | ||
| MTTFd | 34 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 60 % | |
| Indicators/operating means： | ||
| Function indicator |
Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4 Hz) Error message: Yellow LED flashes (8 Hz) in emitter and receiver |
|
| Control elements | Receiver: 2 touch buttons for programming | |
| Electrical specifications： | ||
| Operating voltage | 18 ... 30 V DC | |
| Interface： | ||
| Interface type | IO-Link | |
| Protocol | IO-Link V1.0 | |
| Output： | ||
| Switching type | Factory setting: dark on , Switchable to light-on mode | |
| Signal output |
Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver), Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver) |
|
| Compliance with standards and directives： | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2:2007 | |
| Standard conformity | ||
| Product standard |
EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Mechanical specifications： | ||
| Degree of protection | IP67 | |
| Connection |
Emitter: 200 mm connecting cable with 4-pin, M12x1 connector Receiver: 200 mm connecting cable with 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 30 m |
|
| Material | ||
| Housing | extruded aluminum section , Silver anodized | |
| Optical face | Plastic pane , Polycarbonate | |
上一篇：光栅 LGS17 Serie
下一篇：光栅 LGS8 Serie