来源:未知 日期:2017/07/17 浏览量:次
产品阐述: | ||
---|---|---|
Retroreflective sensor with polarization filter |
一般特性: | ||
---|---|---|
Effective detection range | 0 ... 7.5 m | |
Threshold detection range | 10 m | |
Light source | LED | |
Light type | modulated visible red light | |
LED risk group labelling | exempt group | |
Polarization filter | yes | |
Diameter of the light spot | approx. 65 mm at a distance of 1 m | |
Angle of divergence | 3.7 ° | |
功能安全性参数: | ||
MTTFd | 724 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
指示灯/操作键: | ||
Function indicator |
Yellow LED: Permanently litlight path clear Permanently offobject detected Flashing (4 Hz)operating reserve not reached |
|
Control elements | Light-on/dark-on changeover switch | |
电气特性: | ||
Operating voltage | 10 ... 30 V DC | |
接口: | ||
Interface type | IO-Link ( via C/Q = pin 4 ) | |
IO-Link Revision | 1.1 | |
Min. cycle time | 2.3 ms | |
Process data witdh |
Process data input 2 Bit Process data output 2 Bit |
|
Compatible master port type | A | |
输出: | ||
Switching type |
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on |
|
Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected | |
Usage category | DC-12 and DC-13 | |
与标准和规范体系的一致性: | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2:2007+A1:2012 | |
Standard conformity | ||
Product standard |
EN 60947-5-2:2007+A1:2012 IEC 60947-5-2:2007 + A1:2012 |
|
机械特性: | ||
Degree of protection | IP67 / IP69 / IP69K | |
Connection | 2 m fixed cable | |
Material | ||
Housing | PC (Polycarbonate) | |
Optical face | PMMA |