来源:未知 日期:2018/01/03 浏览量:次
产品阐述: | ||
---|---|---|
Printed circuit board module 2 NAMUR inputs and 1 electronic output |
一般特性: | ||
---|---|---|
Slave type | A/B slave | |
指示灯/操作键: | ||
LED PWR/FAULT |
dual LED green/red LED 1 green: AS-Interface voltage OK LED 1 red: communication error or address is 0 LED 1 green/red flashing: short-circuit or lead breakage |
|
LED IN |
2 LEDs yellow; LED 2 yellow illuminated: switching state IN1 ON, otherwise OFF LED 3 yellow illuminated: switching state IN2 ON, otherwise OFF |
|
电气特性: | ||
Rated operating voltage | 26.5 ... 31.6 V from AS-Interface | |
Rated operating current | ≤ 40 mA (without sensors) / max. 150 mA | |
Protection class | III | |
输入: | ||
Number/Type | 2 inputs for NAMUR Sensors | |
Supply | from AS-Interface | |
Voltage | 8 V | |
Input current | ≤ 8 mA (limited internally) | |
Switching point |
OFF ≤ 1.2 mA ON ≥ 2.1 mA according to DIN EN 60947-5-6 |
|
输出: | ||
Number/Type | 1 electronic output, switched low, overload and short-circuit proof, lead breakage and short-circuit monitored | |
Supply | from AS-Interface | |
Current | max. 100 mA | |
Voltage | 21 ... 31 V | |
编程指令: | ||
Profile | S-D.A.E | |
IO code | D | |
ID code | A | |
ID1 code | 7 | |
ID2 code | E | |
Data bits (function via AS-Interface) | 输入输出 | |
D0 | - OUT1 | |
D1 | - - | |
D2 | IN1 - | |
D3 | IN2 - | |
Parameter bits (programmable via AS-i) | 功能 | |
P0 | not used | |
P1 | not used | |
P2 | not used | |
P3 | not used | |
周围环境: | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
机械特性: | ||
Degree of protection | IP20 (completely fitted) according to EN 60529 | |
Connection |
screw terminal strip max. conductor cross section 1 mm2 |
|
Mass | 20 g |