AS-Interface网关 VBG-PN-K20-D
来源：未知 日期：2017/02/09 浏览量：次
● Gateway compliant with AS-Interface specification 3.0
● Connection to PROFINET IO
● Fault diagnosis via LEDs and grafic display
● Easy commissioning by graphic display
● AS-Interface monitor or extended AS-Interface diagnostic read via display
● Dublicate addressing detection
● Earth fault detection
● AS-Interface noise detection
● All AS-Interface functions possible via Ethernet
● Commissioning, locally on the gateway or via AS-i Control Tools software
● Ethernet diagnostic interface
| 产品阐述： | ||
|---|---|---|
| PROFINET Gateway with integrated switch | ||
| General specifications： | ||
|---|---|---|
| AS-Interface specification | V3.0 | |
| Duplicate address detection | from AS-Interface slaves | |
| Earth fault detection | integrated | |
| EMC monitoring | integrated | |
| Diagnostics function | Extended function via display | |
| UL File Number | E223772 | |
| Functional safety related parameters： | ||
| MTTFd | 105 a at 30 °C | |
| Indicators/operating means： | ||
| Display | Illuminated graphical LC display for addressing and error messages | |
| LED ETHERNET | ethernet active; LED green | |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green | |
| LED CONFIG ERR | configuration error; LED red | |
| LED PRG ENABLE | autom. programming; LED green | |
| LED POWER | voltage ON; LED green | |
| LED PRJ MODE | projecting mode active; LED yellow | |
| LED U AS-i | AS-Interface voltage; LED green | |
| Switch SET | Selection and setting of a slave address | |
| OK button | Mode selection traditional-graphical/confirmation | |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor | |
| ESC button | Mode selection traditional-graphical/cancel | |
| Electrical specifications： | ||
| Insulation voltage | ≥ 500 V | |
| Rated operating voltage | from AS-Interface | |
| Rated operating current | ≤ 300 mA from AS-Interface | |
| Interface 1： | ||
| Interface type | PROFINET I / O device (IRT) | |
| Physical | 2 x RJ-45 | |
| Protocol | Media Redundancy Protocol (MRP) | |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection | |
| Interface 2： | ||
| Interface type |
RS 232, serial Diagnostic Interface |
|
| Transfer rate | 19,2 kBit/s | |
| Interface 3： | ||
| Interface type | Chip card slot | |
| Connection： | ||
| PROFINET | RJ-45 | |
| AS-Interface | removable spring clamp terminals | |
| Compliance with standards and directives： | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007 | |
| Standard conformity | ||
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 | |
| AS-Interface | EN 50295:1999 | |
| Degree of protection | EN 60529:2000 | |
| Shock and impact resistance | EN 61131-2:2004 | |
| Ambient conditions： | ||
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) | |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) | |
| Mechanical specifications： | ||
| Degree of protection | IP20 | |
| Mass | 500 g | |
| Construction type | Low profile housing , Stainless steel | |