联系方式
联系人:王经理
 
电 话:021-39520660
 
手  机:15821591180
 
传 真:021-69001586
 
Q    Q:1257746205
 
Email:debon_gk@163.com
 

Type Z正压系统 5500-MAN-CD01-*

来源:未知    日期:2017/02/22    浏览量:


● Suitable for Class I,II/Div. 1 & 2 for hazardous locations
● Certifications for FM and CSA
● Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
● Suitable for steel or plastic tubing
● Mounting hardware, pneumatic fittings and tubing included


General specifications:
Operating mode automatic purging
Hazardous environment gas or dust
Supply:
Rated power 24 VDC: 4.6 W
120 VAC: 6.8 VA, 60 Hz
230 VAC: 6.8 VA, 60 Hz
Voltage tolerance: +/-10%
Electrical specifications:
Fuse rating DC: 500 mA
AC: 80 mA
(fuse rating on 5500 control unit)
Pneumatic parameters:
Protective gas supply instrument grade air or inert gas
Pressure requirement 1.4 bar (20 psi) to 8.2 bar (120 psi)
Purge flow rate solenoid valve : Cv (flow coefficient) = 1.4
needle valve : Cv (flow coefficient) = 0.25
Ambient conditions:
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications:
Connection type Pneumatic
Input port: 3/8" Tube compression fitting
Output port: 3/8" Tube compression fitting

Electrical connection
½" NPTF thread connection w/ 24" (0.61m) flying leads
Degree of protection type 7 & 9
Material
Housing: anodized aluminum
3/8" compression fittings: 316 stainless steel
Pressure ports: 3/8" NPTF
Bulkhead fitting: 316 stainless steel
Mounting bolts: 1/4 - 20, 316 stainless steel
Sealing washers: UL recognized type 4X
Mass 1250 g (2.8 lb)
Dimensions see dimensions
International approvals:
FM approval FM3006713
Explosion proof: Class I, Divison 1, Group A-D, T4, Ta = 60C
DIP: Class II, Division 1, Groups F+G, T4, Ta = 60C
Nonincendive: Class I, Division 2, Groups A-D, T4, Ta = 60C

Suitable for Class II, Division 2, Groups F+G, T4, Ta = 60C
CSA approval CSA 202633
Class I, Division 1, Groups A-D: Class II, Groups E,F,G
Class I, Division 2, Groups A-D

上一篇:Type Z正压系统 5500 Control Unit
下一篇:没有了