来源:未知 日期:2017/06/15 浏览量:次
一般特性: | ||
---|---|---|
Signal type | Analog input | |
Supply: | ||
Connection | Power Bus or terminals 1-, 2+ | |
Rated voltage | 16.8 ... 31.2 V DC | |
Power dissipation | 0.8 W | |
Power consumption | 1.4 W | |
输入: | ||
Connection | terminals 5+, 6- | |
Input signal | 0/4 ... 20 mA | |
Open circuit voltage/short-circuit current | ≤ 22 V / 35 mA | |
Input resistance | ≤ 25 Ω | |
Transmission range | linearity range: -1 ... 110 % | |
Available voltage | 16 V at 20 mA | |
输出: | ||
Ripple | ≤ 10 mV eff | |
Output I | ||
Connection | terminals 3-, 4+ | |
Output signal | 0/4 ... 20 mA, load ≤ 300 Ω | |
Output II | ||
Connection | terminals 7+, 8- | |
Output signal | 0/4 ... 20 mA, load ≤ 300 Ω | |
传递特性: | ||
Deviation | ≤ 0.1 % of full-scale value | |
Influence of ambient temperature | < 100 ppm/K of full-scale value | |
Frequency range | 0 ... 100 Hz | |
Rise time/fall time | ≤ 3.5 ms | |
指令符合: | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
符合: | ||
Degree of protection | IEC 60529:2001 | |
周围环境: | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
机械特性: | ||
Connection type | screw terminals | |
Core cross-section | 0.5 ... 2.5 mm2 , 20 ... 14 AWG | |
Degree of protection | IP20 | |
Mass | approx. 70 g | |
Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
与危险区域有关的应用参数: | ||
EU-Type Examination Certificate | DEMKO 16 ATEX 1750X | |
Marking | II 3G Ex nA IIC T4 Gc | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
国际认证: | ||
UL approval | E106378 | |
IECEx approval | IECEx UL 16.0116X | |
Approved for | Ex nA IIC T4 Gc | |
附件: | ||
Optional accessories |
power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP |
上一篇:隔离放大器 S1SD-1AI-2U
下一篇:开关放大器 S1SD-1DI-1R