来源:未知 日期:2017/02/15 浏览量:次
General specifications: | ||
---|---|---|
Signal type | Analog input | |
Supply: | ||
Connection | Power Bus or terminals 1-, 2+ | |
Rated voltage | 16.8 ... 31.2 V DC | |
Power dissipation | 0.6 W | |
Power consumption | 0.8 W | |
Input: | ||
Connection | terminals 5+, 6- | |
Input signal | ±60 mV, ±100 mV, ±150 mV, ±250 mV, ±300 mV, ±500 mV | |
Input resistance | ≥ 100 kΩ | |
Transmission range |
linearity range: unipolar -1 ... 110 % bipolar -110 ... 110 % |
|
Output: | ||
Connection | terminals 3-, 4+ | |
Ripple | ≤ 10 mV eff | |
Transfer characteristics: | ||
Deviation | ≤ 0.1 % of full-scale value | |
Influence of ambient temperature | < 100 ppm/K of full-scale value | |
Frequency range | 0 ... 100 Hz , 0 ... 8 kHz | |
Settling time | 7 ms , 150 µs | |
Directive conformity: | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
Conformity: | ||
Degree of protection | IEC 60529:2001 | |
Ambient conditions: | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 | |
Mechanical specifications: | ||
Connection type | screw terminals | |
Core cross-section | 0.5 ... 2.5 mm2 , 20 ... 14 AWG | |
Degree of protection | IP20 | |
Mass | approx. 70 g | |
Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 | |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
Data for application in connection with hazardous areas: | ||
EU-Type Examination Certificate | DEMKO 16 ATEX 1750X | |
Marking | II 3G Ex nA IIC T4 Gc | |
Directive conformity | ||
Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-15:2010 | |
International approvals: | ||
UL approval | E106378 | |
IECEx approval | IECEx UL 16.0116X | |
Approved for | Ex nA IIC T4 Gc | |
Accessories: | ||
Optional accessories |
power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP |
上一篇:隔离放大器 S1SD-1AI-1U.2
下一篇:温度转换器 S1SD-1TI-1U